HP Device Manager 4.5 - Imaging Guide

28
3. After dragging a “PXE Deploy” template onto a device, the Task Editor will appear.
Click OK, and the “PXE Deploy” task will be sent to the device.
NOTES:
The following settings are preserved on the target device:
—WES09/XPe: Hostname, Network, and Write Filter status
—HP ThinPro 3/4: Hostname and Network
When deploying an image to a shutdown device, the device should support
“Network boot first” so it can be woken up. However, the operation will not
preserve any settings on the target device, which is usually used to deploy an
image to a crashed device. You can deploy an image with PXE to a shutdown
WES7 device.
A “PXE Deploy” task will fail when using a wireless connection.