HP Designjet Z5400 PostScript ePrinter - Using your Printer

Contact HP Support
HP Support is available to you by telephone. What to do before you call:
Review the troubleshooting suggestions in this document.
Review the relevant driver documentation.
If you have installed third-party software drivers and RIPs, see their documentation.
If you call one of the Hewlett-Packard offices, please have the following information available to help
us answer your questions more quickly:
The product you are using (the product number and the serial number, found on the label at the
back of the product)
If there is an error code on the front panel, note it down; see
Front-panel error messages
on page 157
The product's Service ID: at the front panel, press
, then , then .
The computer you are using
Any special equipment or software you are using (for example, spoolers, networks, switch-boxes,
modems or special software drivers)
The cable you are using (by part number) and where you purchased it
The type of interface used on your product (USB or network)
The software name and version you are currently using
If possible, print out the following reports; you may be asked to fax them to the support center
helping you: Configuration, Usage Report and “all pages above” from Service Information (see
The
printer’s internal prints on page 11)
Telephone number
Your HP Support telephone number is available on the Web: please visit http://welcome.hp.com/country/us/
en/wwcontact_us.html.
ENWW Contact HP Support 163