HP DesignJet 700/750C Plus Plotters Quick Reference Guide - C4705-90041

20
Company confidential. Murillo QRG. Edition 1. Freeze Status: not frozen
This is the cyan on page 20 (seq: 20)
This is the black on page 20 (seq: 20)
To Load a Cartridge
Always load cartridges with the plotter switched ON.
When handling cartridges, or the cartridge carriage,
touch only the black plastic parts.
1 Match the color of the cartridge label with that of the dot above
the stall.*
2 If the cartridge is new, remove the protective tape and tab from
its nozzles.
3 Press the cartridge lightly down into the stall and away from
you until it snaps into place.
If the front panel displays Reseat cartridge(s), repeat removing
and installing the cartridge until the message disappears.
0019
1754
4 When you have finished, close the cover. The plotter runs the
cartridge-alignment procedure. When the front-panel displays
STATUS / Ready, the procedure is complete.
2
1
Yellow
Cyan
Magenta
Black
DesignJet 700
DesignJet 750C Plus
r004
1
2
2
1
* Users with color-vision deficiencies can identify the colors by the part
numbers on the boxes – see the Accessories List in the User’s Guide.
Localization Note. Identical to 750C/QRG except for . “Install” changed to
“load” and “Reseat cartridge” cahnged to “Reseat cartridge(s)”.
CAUTION
This is the magenta on page 20 (seq: 20)
This is the yellow on page 20 (seq: 20)