HP DesignJet 700/750C Plus Plotters Quick Reference Guide - C4705-90041

14
Company confidential. Murillo QRG. Edition 1. Freeze Status: not frozen
This is the cyan on page 14 (seq: 14)
This is the black on page 14 (seq: 14)
Clearing a Media Jam
1 Switch OFF the plotter, open the window and raise the media
lever.
Off
1867
Media lever
Don’t touch the stainless steel strip behind the
cartridge carriage; it is very sharp. Keep hair,
jewelry, clothing, and foreign objects away
from plotter mechanisms.
When moving the cartridge carriage, touch
only the black plastic parts.
2 Carefully move the cartridge carriage out of the way.
3 Carefully remove any of the jammed media which you can
easily lift up and out.
If the plotter was cutting when it jammed, the cutter carriage
will move with it.
4 Carefully pull the rest of the roll or sheet down and out of
the media entry slot.
5 Lower the window and the lever and switch on the plotter.
Press the
Form Feed and Cut key to eject any pieces of media
still in the media path.
6 Reload the media
Localization Note. Identical to 750C/QRG
WARNING
CAUTION