HP Designjet 5000 series printer - User's Guide

Media & InkIntroduction Front-Panel Other
Index
Solutions
Solving
Problems
Image Quality
Problems
Ink Supply
Problems
Media Problems Image Error Other Problems Getting Help
Printer
Options
Accuracy Calibration
Your printer was calibrated at the factory to ensure
that it operates with the greatest accuracy in normal
environmental conditions. If you are operating under
significantly different conditions, you should
recalibrate the printer as explained here. The printer's
environmental specifications are given on
Environmental Specifications
. You may also need to
recalibrate the printer if you have image quality
problems. Before recalibrating the printer, you should
always use the Image Quality Print to verify that you
do actually have image quality problems caused by
media advance problems.
Click on this icon to run the animation
sequence.
A printable version
of the sequence is also available
so that you can take the key illustrations to the printer, if it is remote from your computer.
To Restore the Factory's Calibration
NOTE: If you notice that after the calibration
the results are worse than before, return the
setting of the media back to the original
setting. Go to Utilities/Calibrations/Accuracy/
Restore Factory.