HP Designjet 5000 series printer - User's Guide

Media & InkIntroduction Front-Panel Other

Index

Solutions

Printer

Options

Media Roll Media Sheet Media The Ink System

The Ink

Cartridge

The Printhead

Cleaner

Roll Media

Loading Roll Media Guidelines

Hints and tips on loading the media. Including how to

install three inch adapters.

Installing Roll Media into the Printer

This section shows you how to:

– Install media onto a spindle.

– Install the roll of media in the correct orientation

into the printer.

Trimming the Media

Before loading media into the printer, make sure the

edge is straight. The animation shows you how to trim

manually the media.

Loading Roll Media

This section shows you how to load media into the

printer and the Take Up Reel.

Printing of Both Sides of the Media

This section shows you how to print on both sides of

the media.

Unload Media from Take Up Reel

This section shows you how to unload the media from

the Take Up Reel.

Unloading Roll Media

This section shows you how to unload the media from

the printers’ internal media path.

Change the Core Tube

This section shows you how to unload the media from

the core tube. The core tube is the tube which the Take

Up Reel winds media onto as it prints.

Media Length Tracking

This section describes how to turn on and off the media

length tracking function.