HP Designjet 4000 Printer Series - Quick Reference Guide

3
How do I handle paper?
● “How do I load a roll onto the spindle?” on page 17
● “How do I load a roll into the printer?” on page 21
● “How do I unload a roll from the printer?” on page 26
● “How do I load a single sheet?” on page 27
● “How do I unload a single sheet?” on page 31
● “How do I select supported paper types?” on page 32
● “How do I view information about the paper?” on page 33
● “How do I download media profiles?” on page 34
● “How do I use non-HP paper?” on page 34
● “How do I cancel the drying time?” on page 34
● “How do I change the drying time?” on page 35
How do I load a roll onto the spindle?
1. Make sure the printer wheels are locked (the brake lever is pressed down) to
prevent the printer from moving.
2. Lower the spindle lever.
3. Remove the right-hand end of the spindle (1) from the printer, then move it to the
right in order to extract the other end (2). Do not insert your fingers into the
spindle supports during the removal process.
17
How do I handle paper?