HP DesignJet 2500 and 2000CP Printer Quick Reference Guide - C4704-90251
Message Explanations and Actions
83
Close window to
continue
You have finished installing the printheads.
Close the window to continue.
Create pattern→
Measure pattern→
Press ↑ to create the pattern for automatic calibration.
Press ↓ to measure the pattern for automatic calibration.
Disk error
Continue→
(HP DesignJet 2500CP only) An error on the hard disk has been detected.
Press ↓ to continue.
Edge not found
Reload media
The printer could not find edge of media during loading procedure.
Check the leading edge of the media for unevenness or tears; cut a straight
edge, if necessary, and reload. Be sure to position the right edge along the
perforated line on the entry platen when loading.
Error processing job
Flushing rest of job→
An error was encountered while the print was being processed. The print has
been lost.
Press ↓ to delete the print.
Fatal disk error
Continue→
(HP DesignJet 2500CP only) An error on the hard disk has been detected.
Press ↓ to continue. Retry the operation by cycling the power. If the problem
persists, servicing the printer is advised.
0HVVDJH ([SODQDWLRQDQG$FWLRQ
qrgbook.bk.fm Page 83 Tuesday, July 28, 1998 5:31 PM