HP DC04 SAN Director Switch Hardware Reference Guide

Monitoring control processor blade (CP8) status
To determine the status of a CP8 blade:
1. Observe the LED indicators on the CP blade (see Figure 29 (page 58)). The LED patterns may
temporarily change during POST and other diagnostic tests. For information about how to
interpret the LED patterns, see Table 10 (page 59).
2. Verify the port blade status by entering the slotShow and haShow commands.
Figure 29 Control processor blade (CP8)
5. Console port (10101)1. Status LED
6. Ethernet port (MGMT)2. Power LED
7. Ethernet port (SERVICE)3. USB LED
8. Active CP LED4. USB port
58 Monitoring DC04 SAN Director system components