HP DC04 SAN Director Switch Hardware Reference Guide

• HP B-series Advanced Performance Monitor Director Switch LTU All
• HP B-series Extended Fabric Director Switch LTU All
• HP DC SAN Director Inter-Chassis Link Cable Kit
Four 2-meter copper cables used to connect two DC SAN Directors via an ICL License.
NOTE: Required for HP DC SAN Director 8 Inter-Chassis Link LTU.
• HP Data Center Fabric Manager Professional+
• HP Data Center Fabric Manager Enterprise
• HP DC SAN Director Switch Adaptive Networking LTU
• HP B-series Server Application Optimization LTU ALL
• HP DC SAN Director 8 Inter-Chassis Link LTU
This additional full duplex connection provides an additional 512 Gbit/sec of bandwidth and
does not consume usable ports. ICL connections operate as hardware trunked ISLs.
NOTE: Each DC SAN Director requires a license for ICL connectivity. HP DC SAN Director
8 Inter-Chassis Link LTU is supported on DC04 SAN Directors and DC SAN Backbone Directors.
DC SAN Director ICL cable kit (AR480A) is required for the physical connection.
• HP Director FICON CUP LTU*
Provides CUP management function designed to allow mainframe applications to perform
configuration, monitoring, management and statistics collection.
*Supported in XP Storage array environments only.
NOTE: Contact your local HP representative for information on exact Fabric OS versions
supported.
• HP DC Switch MultiProtocol Extension Blade FICON CUP Upgrade LTU*
This optional license supports IBM TotalStorage z/OS Global Mirror and FICON Tape
applications over extended FCIP distances.
*Supported on the FX8-24 and FX8-24E blades only.
• HP DC04 Power Pack+ SAN Director Switch LTU
• HP DC04 SAN Director Integrated Routing LTU
• HP Encryption Blade Performance Upgrade
The Encryption blade has a standard capacity of 48 Gb/s of encryption processing power.
Additional encryption processing power can be added for disk I/O by purchasing and
installing an Encryption Blade Disk Performance Upgrade. When the performance upgrade
license is applied, encryption processing power of up to 96 Gb/s is available.
• HP Multi Protocol Extension Blade 10GbE Peformance Upgrade LTU
Enables10 GbE ports for the MP Extension blade. Options for available Ethernet connectivity
are:
◦ 10 1-GbE ports and 1 10-GbE port, or
◦ 2 10-GbE ports
• HP Multi Protocol Extension Blade Advanced Upgrade LTU
This optional license enables two advanced extension features: FCIP Trunking and Adaptive
Rate Limiting.
Optional software licenses 15