HP DC04 SAN Director Switch Hardware Reference Guide

DC04 SAN Director templates
The following port templates are provided for the DC04 SAN Director:
• Port side populated with four FC8-64 port blades, two CR4S-8 blades, and two CP8 blades
• Port side populated with four FC8-48 port blades, two CR4S-8 blades, and two CP8 blades
• Port side populated with four FC8-32 port blades, two CR4S-8 blades, and two CP8 blades
• Port side populated with four FC8-16 port blades, two CR4S-8 blades, and two CP8 blades
• FC10-6 port blades
• FR4-18i router blades
• FS8-18 encryption blades
• FX8-24/FX8-24E Extension blade
• FCOE10-24 FCoE blade
The individual blades are shown vertically to make it easier to read the port numbering. Their
orientation in the DC04 SAN Director chassis is horizontal.
Figure 47 Port side populated with four FC8-48 port blades, two CR4S-8 blades, and two CP8
blades
Figure 48 Port side populated with four FC8-32 port blades, two CR4S-8 blades, and two CP8
blades
124 Port numbering templates