HP DC SAN Backbone Director Switch Hardware Reference Guide

Table 1 Blades available for the DC SAN Director (continued)
FunctionNameDescription
Director, DC SAN Backbone Director, SN8000B 4-Slot SAN
Director, and SN8000B 8-Slot SAN Backbone Director.
The FX8-24E blade enables FCIP functionality over existing IP
infrastructure. It has 12 FC ports, 10 1-GbE ports, and two 10-GbE.
FX8-24EHP StoreFabric Enhanced Multi Protocol
Extension Blade
This application blade is compatible with the DC SAN Director,
and DC04 SAN Director. The blade supports IPsec encryption over
both 10-GbE ports. This Director blade is compatible with the DC04
SAN Director, DC SAN Backbone Director, SN8000B 4-Slot SAN
Director, and SN8000B 8-Slot SAN Backbone Director.
The FCOE10-24 blade enables FCoE functionality over existing
Ethernet infrastructure utilizing CEE protocols. It has 24 10-GbE
FCOE10-24HP DC SAN Director 10/24 FCoE blade
ports. This application blade is compatible with the DC SAN
Director and DC04 SAN Director.
NOTE: This blade cannot be used in the same chassis with an
FC8-64 blade.
12 DC SAN Director overview