Data Protector NDMP Integration Quickstart Guide

13
cell, the system becomes a Data Protector client. Once the system is a client of the cell, information
about the new client is written to the IDB, which is located on the Cell Manager.
3. Specify information about the NDMP Server.
NDMP Server Type
Select one of the available NDMP host types that matches your setup: NetApp, Celerra, BlueArc,
Hitachi, or HPX9000.
Port
Specify the TCP/IP port number of the NDMP Server. The default is 10000.
User Name
Type the user name that Data Protector will use to establish the connection to the NDMP Server.
Default might be “ndmp”. Check the vendor documentation for a valid “ndmp” user name and
password.
Password
Type the password for the user. For NetApp FAS3070, use the password generated in one of the
previous steps.
4. Create the NDMP media pool.
Figure 9: Create the NDMP media pool
Note: Although Data Protector provides default media pools, you should create your own media
pool to suit your needs. Select the Media Type that matches the tape drive technology on your
StoreOnce backup device. For example, select LTO-Ultrium if you have selected LTO4 on the
backup device.
5. Create a Backup Library configuration.