HP Data Protector MOM Configuration and Troubleshooting Guide

11 | P a g e
2. In the Control tab, you can see additional boxes for configuring the client and the SCSI
address. Select the appropriate clients and paths for the device. Click Add to add all hosts to
the library configuration. The path that is available in the SAN to be selected, will have a
green tick in front of it. The Add button will become active once an available path is
highlighted. When all hosts have been added under the Configured paths, define the priority
of the clients by moving them up or down using the arrows on the right of the Configured
paths window:
Figure 9: Media configuration
Select the available
path from the drop-
down list.
Define the host
priority by moving
the hostname up
and down.