HP Data Protector A.06.1x Device support matrix

2
This device requires DAS software from ADIC. The following versions of DAS have been tested with Data Protector:
 DAS 1.30
 DAS 1.30C
 DAS 3.01 (single DAS server)
 DAS 3.10
 DAS 3.12
HP support covers configuration and usage of DAS within Data Protector, but HP provides no support for DAS software.
3
Library or autoloader supported only in stacker mode.
4
Supported with the patches PHSS_41962/PHSS_41963/DPLNX_00152/DPSOL_00446
5
To utilize IBM 3584 on Linux, the IBM device drivers are required. These can be obtained from the following web page:
http://www-1.ibm.com/support/all_download_drivers.html
6
You need to add the line OB2SHORTSEEK=500 in the omnirc file.
7
Insight Storage Agent should be disabled when using the HP StorageWorks SSL1016 tape autoloader with LTO 460 on Windows 2000/XP with the
Adaptec U160 SCSI HBA.
8
TL895 option ”Auto Drive Unload” needs to be enabled (which is not the default setting).
9
Minimum revision of SYS$MKDRIVER required:
VMS 7.3-1:
image file identification: “X-12”
image file build identification: “X9TD-0060030044”
link date/time: 28-JAN-2004 14:33:50.53
10
The IBM AIX media agent supports drives only; the library robotic must be connected to a system that supports a Data Protector Media Agent
with robotic support which supports the library (that is an HP-UX, Sun Solaris, Linux or Windows system).
11
To utilize Sony AIT and SAIT on HP-UX, the Sony device driver is required. The driver can be obtained from the following web page:
http://sony.storagesupport.com/ait/hpux.htm
12
Emulations supported with the Fujitsu EternusCS:
ETERNUS CS Tape
Emulation
Drive Configured in
Data Protector
CentricStor Robot
Control Emulation
Robotic Configured in
Data Protector
HP-UX PA
HP-UX IA
Windows
Solaris
Linux
AIX
Generic SCSI-2
3480
SCSI
SCSI Library






Generic SCSI-2
3480
DAS
DAS Library





