HP Data Protector Software Cell Manager Failover Process (standby Cell Manager)

Figure 6.

2. Modify the following parameters in the global options file on the production Cell Manager

(site(A)).

ScriptOutputTimeOut=600

This was increased to 600 minutes to allow enough time for the “dp_database1-pre.bat” script to

complete.

Note

# ScriptOutputTimeout=TimeoutInMinutes

# default: 15 minutes

# This timeout is used by the Backup SM. The session pre-exec

# or post-exec script should send some output at least every

# ScriptOutputTimeout minutes, or the session gets aborted by

# the Session Manager

FileMediumCapacity=10240

Note

# FileMediumCapacity=MaxSizeInMBytes

# default: 100

# If you are using "file" devices, you should change this to

# specify the maximum size of a ”file” medium. When Data Protector

# writes specified size of data in one file, you will get a

# mount prompt. Or if you are using "file” exchanger, the next

# "file medium” will be loaded. If the global option is

# changed, the logical medium must be exported and the file

# removed before initialization. Otherwise the original size

# will be used.