HP Data Protector Integrating an ACSLS server through a firewall

6
5. Respond y or n to the prompt for installing a SCSI device driver for SCSI libraries.
Do you want to install the scsi device driver for SCSI libraries? (y or n): y
Refer to the following example for the prompts you need to answer.
Note: Sun StorageTek libraries attached behind supported Fibre host-bus adapters (HBAs) can be auto-
sensed by ACSLS using the capabilities included in supported HBA software. Supported HBAs currently
include all contemporary Emulex, Qlogic, and Sun-branded HBAs. The ACSLS SCSI driver installation utility,
install_scsi_sol.sh can configure multiple mchanger devices easily without the need for explicit user
interaction. Libraries behind non-supported HBAs continue to function in the traditional manner, where you
declare the target and LUN address for each attached library. The installation utility then displays each library
for which a mchanger instance has been created.
Example:
bash-3.00# ./install.sh
install.sh 1673: Starting ACSLS 7.3.0 installation.
Do you wish to continue with the install? (y or n):
Checking for shared memory setting...
No Informix server process present.
What directory do you want to use for Informix backups [/export/backup]?
/export/backup
Back up directory is: /export/backup
Creating links to Database libraries...
Initializing the Database server....
Database server successfully initialized.
Trying to start up the DB server - Attempt 1
Database server started successfully.
Database successfully created....
All permissions granted to lib6.
All permissions granted to acsss.
Automatic backup schedule updated.
Your system is currently configured in such a manner that when it reboots, it will
automatically restart the ACSLS.
Do you want your system configured so that when it reboots it automatically
restarts the ACSLS? (y or n): y
fix rc.sh 1864: Adding commands to automatically restart ACSLS on reboot.
Do you want to install the SCSI device driver for SCSI libraries? (y or n): y
Installing 64-bit mchanger
Enter the scsi device(s) that correspond to each STK library libraries. Separate
devices with a space (example: 4 5 6).
Remember that scsi devices are numbers between 0 and 15.
==> 0:0
Is this correct? (y or n): y
-- >SCSI ID should be known using operator panel and give name as /dev/mchanger4
This step finishes the installation of the ACSLS server.
You can find the SCSI address of the STK Library in three different ways:
• Using the probe-scsi-all command output from the ok prompt:
Note: The target is 0 and the unit 0. So the SCSI value is '0:0'.