File Library and File Jukebox relocation in DP

15
Methodology Based on Traditional Import
In the previous chapter the used relocation method was based on modifying the logical device
definitions within the Media Management DB of course in combination with a real physical relocation
of the respective LUN’s. This was shown for the File Library and the File Jukebox as well.
For those who don’t like to download logical device definitions to change them, followed by an
upload in the media management DB, there is the “traditional import“ method too.
To prove / show this methodology we’ll demonstrate it shortly.
Keep in mind that this will only work with a file Jukebox, and is not possible with a file library since
the repository of a FL can’t be imported.
Backup-to-Disk
The datalist was re-executed exactly as defined during the initial setup.
Figure 8. Redo the original backup
The session output of 2008/08-11 can be found in Appendix B.
File C:\JB\file02 was used as medium.