HP D6000 Disk Enclosure Installation Instructions

6. Install the hard drive.
WARNING: Pinch hazard—Keep hands out of front and rear
of chassis when closing hard drive drawers.
7. When all drives have been installed, close the hard drive drawer.
3 Installing optional I/O modules
The D6000 ships with two I/O modules, one for each storage drawer. Installing
additional I/O modules expands support from single-domain to dual-domain.
CAUTION: If the I/O module is installed in an enclosure for
which it was not designed, the module will not function
properly. Read the labels on the I/O module and the
enclosure to confirm compatibility. For example, an I/O
module with a "6G IO module" label is supported for use only
in the 6G, D6000 disk enclosure; an I/O module with no
label is supported for use only in a 3G disk enclosure such as
the MDS600.
To install an I/O module:
1. Be sure the hard drive drawer is closed completely.