HP StoreOnce Conversion from 2.x.x software to 3.4.x (or later) Software Guide (BB852-90949, November 2013)

Configure other appliance settings and create backup targets
Your StoreOnce Appliance is now converted to 3.4.x (or later) software and ready to use, refer
to the HP StoreOnce Backup system User Guide and the HP StoreOnce Backup system Installation
and Configuration guide for more information on completing configuration, for example: applying
licenses for Replication and Catalyst licenses, setting up email alerts and SNMP traps, and for
information on creating and using backup devices such as Virtual Tape libraries, NAS shares or
Catalyst stores.
IMPORTANT: Licenses for Replication that were purchased for use on your existing appliance
are also valid after the conversion to 3.4.x (or later) software. In addition, after the conversion,
you can purchase licenses to use the Catalyst functionality. Please note that all licenses are applied
via the StoreOnce CLI, not via the GUI. See Apply licenses for capacity expansion (page 21) for
more details about loading or adding licenses.
Configure other appliance settings and create backup targets 23