HP Store Once Backup System 2700, 4500 and 4700 Installation and Configuration Guide

ManualsBrandsHP ManualsStorageHP D2D4106fc Backup System

Miscellaneous

If NTP, email and SNMP requirements are specified prior to installation, it will help you configure

your system.

NTP is recommended for time synchronization, for example when replicating data.1.

1. Do you want NTP server connection?................................................................................

2. What is the IP address of the NTP server(s)?.......................................................................

(Up to two NTP servers are supported)...............................................................................

2. 1. Should email alerts be configured?.....................................................................................

2. Who should receive the emails?.........................................................................................

(Provide a list of email addresses and what they should receive, i.e. Information / Warning /

Alert)

.............................................................................................................

3. SMTP server address.........................................................

Mail From ......................................................................................

Reply To......................................................................................

Do you wish to use the integrated StoreOnce Remote Support feature?

.......................................................

Do you wish to configure SNMP traps? .........................................

NOTE: SNMP traps are used other tools internal to the organisation and for HP Remote Insight

Remote Support, IRS. However, please note that IRS should not be used at the same time as the

StoreOnce Remote Support feature.

For information about the free HP Remote Insight Remote Support service go to the IRS Remote

Support web page at:

http://h18004.www1.hp.com/products/servers/management/insight-remote-support/

overview.html.

Please provide configuration settings

1. IP address of SNMP management server................................................................................

2. TRAP targets......................................................................................................................

(Provide a list)....................................................................................................................

3. Community strings..............................................................................................................

(Provide a list)....................................................................................................................

Do you have the correct licenses for your installation?4.

• An Instant-On license is available for StoreOnce Catalyst and Replication. This is valid for 90

days.

NOTE: The Instant On license is not valid for capacity expansion nor the StoreOnce Security

Pack, which always require a full license.

• A full license is required for all storage that is additional to the base configuration and for

StoreOnce Security Pack. Make sure you obtain and apply the licenses in the correct sequence;

there are different licenses for the Capacity expansions.

• When the Instant-On license expires you must apply the full licenses for StoreOnce Replication

and Catalyst, if you wish to continue using these StoreOnce functions.

Save passwords to a secure location5.

• The label on the server head unit contains the iLO4 password and IP address for the system.

Make a note of this information before you install the HP StoreOnce Backup system in the rack.

• Changing the passwords for the default user accounts (Administrator, Operator, HPresetpassword

and iLO) after installation is strongly recommended. Be sure to make a note of the new passwords

and save them to a secure location, such as an offline Password Security tool.

Miscellaneous 13