HP StoreOnce Backup System CLI Reference Guide

config show list
Description of Command Function
Displays a list of saved configuration files or keystores. A saved configuration file is any file located
in the config directory with the .zip extension which is accessible through the SFTP. (A
configuration file listed by this may not be a valid configuration file. The user must manage the
transfer of valid configuration files into the config directory.)
Command Syntax
config show list [devices|keystore]
Command Authority
Operator and Administrator
Command Object Requirements
Not applicable – no objects exist within this command.
Command Parameter Requirements
• devices – This optional parameter lists available device configuration files stored in the
configuration jail directory.
• keystore – This optional parameter lists the keystores saved in the configuration jail directory.
Requirements for Command Execution
The command entry must conform to command syntax.
Successful Command Output
Upon successful completion of the command, the configuration file information or keystore file
name is displayed.
Command Operation during Abnormal Conditions
If the command does not conform to the required syntax, the following is displayed:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
Examples
# config show list
Location: /config
Configuration
-------------
devconfig_hpd4856476a1fc_Thur_Jul_19_10:33:24_UTC_2012.zip
devconfig_hpd4856476a1fc_Fri_Jul_13_16:54:24_UTC_2012.zip
Command Successful
# config show list keystore
Keystore files:
keystore_HPCZ32482R4R_2013-08-02T174433Z.kms
config show list 57