HP StoreOnce Backup System CLI Reference Guide

vtl show library iscsi authentication
NOTE: This command applies to single-node products only.
Description of Command Function
Displays information on a library’s CHAP (challenge handshake authentication protocol)
configuration.
Command Syntax
vtl show library iscsi authentication SETX LIBX
Command Authority
Administrator
Command Object Requirements
SET
X
This required object defines the service set containing the library whose CHAP
information is displayed. X is the numeric index of the service set. It is optional on a single-node
system but must be defined on a multi-node system. If used on a single-node system, the object
must be defined as SET1.
LIB
X
This required object is the virtual tape library whose CHAP information is displayed.
X is the numeric index of the library.
Command Parameter Requirements
Not applicable no parameters exist within this command.
Requirements for Command Execution
The command entry must conform to command syntax.
All object values must be valid. See object requirements for details.
Successful Command Output
Upon successful completion of the command, the CHAP configuration information is displayed.
Command Operation during Abnormal Conditions
If any of the command execution requirements fail, command execution terminates, the library's
CHAPS information is not displayed, and one of these error messages is displayed:
Command Failed Did not conform to the correct command syntax vtl
show library iscsi authentication SETX LIBX
Command Failed The service set <SETX> is invalid
Command Failed The service set <SETX> does not exist
Command Failed The library <LIBX> is invalid
Command Failed The library <LIBX> does not exist
Command Failed The library interface is not iSCSI
Example
# vtl show library authentication LIB1
Library : LIB1
iSCSI Name : my.iscsi.initiator
Authenticate Initiator : Yes
CHAP User Name : iusertname
CHAP Secret : mypassword
Authenticate Target : Yes
CHAP User Name : tusername
CHAP Secret : mypassword
258 Alphabetical List of Commands and Details