HP StoreOnce Backup System CLI Reference Guide

| MSL8X96 | EML | ESL }] [DriveEmulation { LTO2 | LTO3 | LTO4 | LTO5
| UltriumVT }] [DrivePort <number>[,<number>]] [NoOfSlots <number>]
[NoOfDrives <number>] [Port <number> [,<number>]] [iSCSIname <string>
] [iAuthenticationEnable {yes | no}] [iUsername <string>] [iSecret
<string>] [tAuthenticationEnable {yes | no}] [tUsername <string>]
[tSecret <string>] [wwpn <wwpn>] [wwnn <wwnn>] [BarcodeLength { 6
| 8 }] [nonstop {yes | no}]”
• Command Failed – The entry does not conform to command syntax. The
number of double quotes (“) is odd.
• Command Failed – The service set <SETX> is invalid
• Command Failed – The service set <SETX> does not exist
• Command Failed – The library <LIBX> does not exist
• Command Failed – Invalid Parameter: <parameter> value: <value>
• Command Failed – The name must be equal to or less than 30 characters
• Command Failed – The interface <interface> is invalid
• Command Failed – The library port <LibPort> is invalid
• Command Failed – The library emulation <LibEmulation> is invalid
• Command Failed – The drive emulation <DriveEmulation> is invalid
• Command Failed – The drive port <DrivePort> is invalid
• Command Failed – The number of slots must be between 0 and 16834
• Command Failed - The number of drives must be between 0 and 192
• Command Failed – Drive fibre channel port defined for <interface>
interface
• Command Failed – Library fibre channel port defined for <interface>
interface
• Command Failed – iSCSI parameters defined for <interface> interface
• Command Failed – iSCSI name must equal to or less than 224 characters
• Command Failed – Worldwide port names defined for <interface>
interface
• Command Failed – Worldwide node name defined for <interface>
interface
• Command Failed – The number of library worldwide port names do not
equal number of library ports.
• Command Failed – Worldwide port name(s) are invalid
• Command Failed – World wide port names must consist of 16 hexadecimal
characters
• Command Failed – The world wide port names list contains and
unsupported value: <value>
• Command Failed – Worldwide node names(s) are invalid
• Command Failed – The number of slots is greater than the library
emulation
• Command Failed – The number of drives is greater than the library
emulation
• Command Failed – The barcode length must be either 6 or 8
244 Alphabetical List of Commands and Details