HP StoreOnce Backup System CLI Reference Guide

Successful Command Output
Upon successful completion of the command, the following is displayed:
Command Successful
Command Operation during Abnormal Conditions
If any of the command execution requirements fail, command execution terminates, the cartridge
is not modified, and one of these error messages is displayed:
• Command Failed - Did not conform to the correct command syntax “vtl
modify cartridge [SETX] LIBX [{CARTX | ALL}] [ slot <num> ]
[WriteProtect { yes | no }] [barcode <string>] [CartSize {10 | 25
| 50 | 100 | 200 | 400 | 800 | 1000 | 1200 | 1400 | 1600 | 3200}]”
• Command Failed – The service set <SETX> is invalid
• Command Failed – The service set <STX> does not exist
• Command Failed – The library <LIBX> is invalid
• Command Failed – The library <LIBX> does not exist
• Command Failed – “ALL”, CARTX or a slot must be defined
• Command Failed – The slot <slot> does not exist in library
• Command Failed – The slot <slot> does not contain a cartridge
• Command Failed – The barcode string does not conform to the library
barcode parameters
• Command Failed – The barcode string must consist of 8 alphanumeric
characters
• Command Failed – The barcode string is not unique in the library
• Command Failed – The cartridge size must be 10, 25, 50, 100, 200,
400, 800, 1000, 1200, 1400, 1600 or 3200
• Command Failed – The data on the cartridge(s) is greater than the
cartridge size.
Example
# vtl modify cartridge LIB1 CART5 barcode ABC123
Command Successful
238 Alphabetical List of Commands and Details