HP StoreOnce Backup System CLI Reference Guide

time set UTC
Description of Command Function
Sets the value of the system clock on the cluster to the value defined within the command entry.
NTP must be disabled for this command to execute.
Command Syntax
time set UTC <mm/dd/yyyy hh:mm:ss>
Command Authority
Administrator
Command Object Requirements
Not applicable – no objects exist within this command.
Command Parameter Requirements
date time – This parameter must appear in the command entry after time set UTC. The parameter
is entered in the 24-hour format, MM/DD/YYYY hh:mm:ss, where MM represents the numeric value
of the month, DD represents the day, YYYY represents the year, hh represents the UTC hours, mm
represents the UTC minutes and ss represents the UTC seconds.
Requirements for Command Execution
The command entry must conform to command syntax.
Successful Command Output
Upon successful completion of the command, the following is displayed:
The D2D appliance UTC has been set to MM/DD/YYYY hh:mm:ss, where MM/DD/YYYY
hh:mm:ss is the UTC value defined in the command entry.
Command Operation during Abnormal Conditions
If the command does not conform to the required syntax, the following is displayed:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
Example
# time set utc 06/02/2014 17:57:00
Command Successful. The Backup System UTC has been set to 06/02/2014 17:57:00.
212 Alphabetical List of Commands and Details