HP StoreOnce Backup System CLI Reference Guide

<--Another subnet: Yes - on the same VLAN port set
Enter VLAN tag (an integer between 2 and 4094 inclusive) :
-->555
<--VLAN Tag: 555
Select Static or DHCP addressing :
1 = DHCP (default)
2 = Static
-->1
<--DHCP/Static: DHCP
Do you want to configure a static default gateway for this subnet or get the gateway information from DHCP?
1 = Gateway obtained from DHCP server (default)
2 = Set gateway manually
-->1
<--Gateway: Gateway obtained from DHCP server
Do you want to configure the network domain name or get the domain name from DHCP?
1 = Domain name obtained from DHCP server (default)
2 = Set domain name manually (e.g. mydomain.local)
-->1
<--Domain Name: Domain name obtained from DHCP server
----------------------
Network: subnet_2
----------------------
IP Addresses: dhcp
Net Mask: dhcp
Domain Name: dhcp
Gateway: dhcp
VLAN tag: 555
Port Set: portset_1 with these interfaces: eth6 eth7
Bonding Mode: 1 (Active Passive Bonding)
Is this configuration correct?
1 = Yes (default)
2 = No
-->1
<--Configuration okay: Yes
Do you want to configure another subnet?
1 = No (default)
2 = Yes - on a new port set
3 = Yes - on the same VLAN port set
-->2
<--Another subnet: Yes - on a new port set
Select the type of configuration for this subnet :
1 = Single port (default)
2 = Bonded ports (note ports must be the same speed to bond)
-->1
<--Bonded/Single: Single port
Select network adapter :
1 = eth0 (1 Gig) (default)
2 = eth1 (1 Gig)
3 = eth2 (1 Gig)
4 = eth3 (1 Gig)
4 = eth4 (10 Gig)
5 = eth5 (10 Gig)
-->5
<--Single Port: eth5 (10 Gig)
Is this subnet on a Virtual LAN?
1 = Not VLAN (default)
2 = VLAN
-->1
<--VLAN/Not VLAN: Not VLAN
Select Static or DHCP addressing :
1 = DHCP (default)
2 = Static
-->1
<--DHCP/Static: DHCP
Do you want to configure a static default gateway for this subnet or get the gateway information from DHCP?
1 = Gateway obtained from DHCP server (default)
2 = Set gateway manually
-->1
<--Gateway: Gateway obtained from DHCP server
net set wizard 133