HP StoreOnce Backup System CLI Reference Guide

IMPORTANT: If a parameter is undefined in the modify command sequence, the current parameter
value remains unchanged.
If a parameter is given the value undefined, a value is no longer declared for the parameter.
Requirements for Command Execution
• The writeprotect parameter must be set to NO for this command to execute. (The writeprotect
parameter can be modified independent of the current state of the writeprotect parameter.)
• The command entry must conform to command syntax.
• All object values must be valid. See object requirements for details.
• All parameter values must be valid. See parameter requirements for details.
Successful Command Output
Upon successful completion of the command, information on the external network configuration is
displayed.
Command Operation during Abnormal Conditions
If the command does not conform to the required syntax, the following is displayed:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
Example
# net modify config management dns 13.13.100.8
net modify config 127