HP StoreOnce Backup System CLI Reference Guide

net copy config
Description of Command Function
Copies a network configuration.
Command Syntax
net copy config from <netlabel> to <newnetlabel>
Command Authority
Administrator
Command Object Requirements
• netlabel – The data structure in this network configuration is copied to the new network
configuration object created by this command.
• newnetlabel – This network configuration object is created by this command.
Command Parameter Requirements
• from – This parameter identifies the label of the network configuration whose data structure
is to be copied and assigned to a new network configuration with a different label.
• to – This parameter identifies the label of the network configuration created by this command.
The label must uniquely identify the network configuration and may not be ALL or begin with
the letters grp. If the label is ALL, begins with grp, or is already being used to identify a
network configuration, an error message is generated, and the execution of the command
fails.
Requirements for Command Execution
• The command entry must conform to command syntax.
• All object values must be valid. See object requirements for details.
• All parameter values must be valid. See parameter requirements for details.
Successful Command Output
Upon successful completion of the command, information on the external network configuration is
displayed.
Command Operation during Abnormal Conditions
If the command does not conform to the required syntax, the following is displayed:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
Example
# net copy config from default to management
net copy config 117