HP StoreOnce Backup System CLI Reference Guide

net activate status
Description of Command Function
Displays the status of the previous activate operation.
Command Syntax
net activate status
Command Authority
Administrator
Command Object Requirements
Not applicable – no objects exist within this command.
Command Parameter Requirements
Not applicable – no parameters exist within this command.
Requirements for Command Execution
• The command entry must conform to command syntax.
• Execute the net activate command before executing the net activate status
command.
Successful Command Output
Upon successful completion of the command, the following message is displayed, and then the
CLI returns to the user prompt:
Command Successful
Command Operation during Abnormal Conditions
If command execution fails, the following is displayed:
Wrong number of arguments: expected 0, found 1
Command failed.
Command Operation during Abnormal Conditions
If the command does not conform to the required syntax, the following is displayed:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
Example
Without net activations:
No net activations have occurred.
Command Succeeded
With net activations:
net/activate# status
Activation started on 25/04/2014 at 18:29:39-0600 completed successfully on 25/04/2014 at 18:31:22-0600
Total running time was 00:01:43.43814
Command Succeeded
NOTE: The example output is in a small font to fit on this specification page. As a CLI output,
the character string wraps at the end of a terminal line.
110 Alphabetical List of Commands and Details