HP StoreOnce B6200 Maintenance and Service Guide (February, 2014)

Figure 6 Rear view of the HP B6200 server node
FC port, bottom card (identified as FC Port 2
on the StoreOnce GUI)
2FC port, top card (identified as FC Port 1 on
the StoreOnce GUI)
1
10 GbE port eth4, (reserved for internal use)4Unused FC ports (cards 1 and 2)
NOTE: StoreOnce software v3.9.0 and later:
these ports are available for use. See HP
StoreOnce Backup system user guide for
details.
3
SAS port 1, card 1, to adjacent P2000
controller
610 GbE port (eth5)5
10 GbE port (eth6, reserved for internal use)8SAS port 2, card 1, to failover P2000
controller
7
Power supplies10, 1110 GbE port (eth7)9
VGA connector14USB connectors12, 13
1 GbE port (eth1)161 GbE port (eth0)15
SAS port 1, card 2, to adjacent P2000
controller
19PS2 connectors17, 18
SAS port 2, card 2, to failover P2000
controller
21iLO3 port (reserved for internal use)20
1 GbE port (eth3)231 GbE port (eth2)22
28 Maintaining server (node components) — HP ProLiant DL380 G7 Server