HP StoreOnce Backup System Linux and UNIX Configuration Guide (BB852-90952)

# kcmodule –B stape=static schgr=static
* The automatic 'backup' configuration has been updated.
Module State Cause
schgr (now) static best
(next boot) static explicit
stape (now) static best
(next boot) static explicit
HP-UX 11i v3
# kcmodule –h –B stape=static estape=static schgr=static eschgr=static
* The automatic 'backup' configuration has been updated.
Module State Cause
schgr (now) static best
(next boot) static explicit
stape (now) static best
(next boot) static explicit
eschgr (now) static best
(next boot) static explicit
estape (now) static best
(next boot) static explicit
10. To create device files for the target devices, type the following:
# insf –H 255
11. To display the device files associated with the operational target devices, type:
# ioscan –fnH 255
Class I H/W Path Driver S/W State H/W Type Description
==========================================================================
iscsi 0 255/0 iscsi CLAIMED VIRTBUS iSCSI Virtual Node
ext_bus 8 255/0/0.0 iscsial CLAIMED INTERFACE iSCSI-SCSI Protocol
Interface
target 10 255/0/0.0.0 tgt CLAIMED DEVICE
tape 1 255/0/0.0.0.0 stape CLAIMED DEVICE HP Ultrium 3-SCSI
/dev/rmt/1m /dev/rmt/1mn
/dev/rmt/c8t0d0BEST /dev/rmt/c8t0d0BESTn
/dev/rmt/1mb /dev/rmt/1mnb
/dev/rmt/c8t0d0BESTb /dev/rmt/c8t0d0BESTnb
ext_bus 9 255/0/2.0 iscsial CLAIMED INTERFACE iSCSI-SCSI Protocol
Interface
target 11 255/0/2.0.0 tgt CLAIMED DEVICE
autoch 0 255/0/2.0.0.0 schgr CLAIMED DEVICE HP MSL G3 Series
/dev/rac/c9t0d0
In this example the tape drives device files are:
AT&T, best density available/dev/rmt/1m
Berkeley, best density available/dev/rmt/1mb
AT&T, no rewind, best density available/dev/rmt/1mn
Berkeley, no rewind, best density available/dev/rmt/1mnb
AT&T, best density available/dev/rmt/c8t0d0BEST
Berkeley, best density available/dev/rmt/c8t0d0BESTb
AT&T, best density available/dev/rmt/c8t0d0BESTn
Berkeley, no rewind, best density available/dev/rmt/c8t0d0BESTnb
And the autochanger device file is:
/dev/rac/c9t0d0
Configuring the HP StoreOnce Backup System for Fibre Channel
For a Switched Fabric Configuration, zone the individual devices to the host concerned using the
virtual device WWNs shown on the product's GUI.
20 HP-UX 11i v2/v3 (PA-RISC & IA64)