HP StoreOnce Backup System CLI Reference Guide

logs show update
Description of Command Function
Provides logs of all software updates that have occurred on the system.
Command Syntax
logs show update
Command Authority
Administrator
Command Object Requirements
Not applicable – no objects exist within this command.
Command Parameter Requirements
Not applicable – no parameters exist within this command.
Requirements for Command Execution
The command entry must conform to command syntax.
Successful Command Output
Upon successful completion of the command, the output is displayed as in the example below.
Command Operation during Abnormal Conditions
If the command does not conform to the required syntax, the following is displayed:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
Examples
# logs show update
14:25:20 Verifying staged package repository integrity.
14:25:23 Package stage area verification successful.
14:25:24 Updating cluster from version '3.9.0-1334.2' to '3.9.0-1336.2'.
14:25:24 Reboot will occur after update completes.
14:25:24 Installing update tool packages. Can take 5 minutes to complete.
14:25:24 node 5 : Installing: D2D_UpdateTools
14:25:24 node 4 : Installing: D2D_UpdateTools
14:25:24 node 2 : Installing: D2D_UpdateTools
14:25:24 node 3 : Installing: D2D_UpdateTools
14:25:24 node 8 : Installing: D2D_UpdateTools
14:25:24 node 6 : Installing: D2D_UpdateTools
14:25:24 node 7 : Installing: D2D_UpdateTools
14:25:24 node 1 : Installing: D2D_UpdateTools
14:25:25 node 5 : Install successful
14:25:25 node 4 : Install successful
14:25:25 node 6 : Install successful
14:25:26 node 8 : Install successful
14:25:26 node 7 : Install successful
14:25:26 node 3 : Install successful
14:25:26 node 2 : Install successful
14:25:26 node 1 : Install successful
14:25:26 Update tool package installation successful.
14:25:27 Updating cluster from version '3.9.0-1334.2' to '3.9.0-1336.2'.
14:25:27 Reboot will occur after update completes.
14:25:27 Verifying status of hardware and services.
14:25:27 Hardware and services status verification successful.
14:25:27 Stopping service sets. Can take 30 minutes to complete.
14:27:04 Stop service sets successful.
14:27:04 Disabling service set failover.
14:27:04 Disabling service set failover successful.
14:27:04 Stopping file services.
14:27:18 File service stop successful.
14:27:18 Stopping management service failover. Can take 30 minutes to complete.
14:27:39 Management service failover stopped successful.
14:27:39 Stopping management services.
14:28:16 Management services stop successful.
14:28:31 Cleaning up old packages
14:28:32 Removing test packages
14:28:32 Installing packages. Can take 30 minutes to complete.
14:28:32 node 5 : Installing: D2D_Master-3.9.0-1336.2
14:28:32 node 1 : Installing: D2D_Master-3.9.0-1336.2
14:28:32 node 3 : Installing: D2D_Master-3.9.0-1336.2
14:28:32 node 8 : Installing: D2D_Master-3.9.0-1336.2
14:28:32 node 7 : Installing: D2D_Master-3.9.0-1336.2
14:28:32 node 2 : Installing: D2D_Master-3.9.0-1336.2
logs show update 99