HP StoreOnce Backup System CLI Reference Guide

Table 1 Login Information
Command PromptDefault PasswordUser NameCan ExecuteAuthorization Level
>operatorOperatorCommands that
provide information
Operator
about the state and
configuration of the
StoreOnce appliance
but no commands that
change the
configuration.
#adminAdminCommands that
provide information
Administrator
about the state and
configuration of the
StoreOnce appliance,
plus commands that
configure or change
the configuration of
the StoreOnce
appliance.
Command Entry
Upon log in, the cursor appears after the command prompt. Instruction entry elements are placed
after the prompt by entering the appropriate characters and symbols. Pressing Enter directs the
Common CLI to interpret the instruction entry and perform the defined operation. After the operation
is completed, the command prompt is displayed, and another instruction may be entered.
Before pressing Enter, the text after the command prompt can be edited by pressing Delete or
Backspace and using the right and left arrow keys.
8 Using the CLI