HP StoreOnce Backup System CLI Reference Guide

hardware show net status
NOTE: This command applies to multi-node products.
Description of Command Function
Provides status on the StoreOnce file server node’s network interfaces.
Command Syntax
hardware show net status
Command Authority
Operator and Administrator
Command Object Requirements
Not applicable – no objects exist within this command.
Command Parameter Requirements
Not applicable – no parameters exist within this command.
Requirements for Command Execution
The command entry must conform to command syntax.
Successful Command Output
Upon successful completion of the command, the status of the hardware network interfaces is
displayed. The displayed status can be one of the following:
• Up
• LinkUp
• Inactive
• Standby
• LinkDown
• BondsDegraded
• NicsStatusStale
Command Operation during Abnormal Conditions
If the command does not conform to the required syntax, the following is displayed:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
Example
# hardware show net status
HOST IFNAME TYPE STATE IP
_ADDRESS IPv6_ADDRESS MAC_ADDRESS BACKUP_HOST BACKUP_IF ROUTE VL
AN_TAG LINKMON
---------------------------------- ------- ------- ---------------------- --
--------- ------------ ----------------- -------------- --------- ----- --
------ -------
hp31504d7870-1 bond1 User Up, LinkUp 16
.78.8.171 64:31:50:4d:78:70
No
hp31504d7870-1 bond0 Cluster Up, LinkUp 10
.154.4.1 98:4b:e1:33:e2:60
No
hp31504d7870-1 bond2:1 User Up, LinkUp 10
.1.5.6 98:4b:e1:33:e2:64 hp31504d7870-2 bond2:3
No
hp31504d7870-1 bond2:3 User Inactive, Standby
78 Alphabetical List of Commands and Details