HP StoreOnce Backup System CLI Reference Guide

hardware show firmware

Description of Command Function

Shows server and storage firmware components.

Command Syntax

hardware show firmware [NODEX|storageX|switchX]

Command Authority

Operator and Administrator

Command Object Requirements

• NODE

– This optional parameter can be used to define an individual file server node. X is

a unique numeric index defining the hardware component and applies only to multi-node

products.

• storage

– This optional parameter can be used to define an individual storage array. X is a

unique numeric index defining the hardware component and applies only to multi-node

products.

• switch

– This optional parameter can be used to define an individual switch. X is a unique

numeric index defining the hardware component and applies only to multi-node products.

Command Parameter Requirements

Not applicable – no parameters exist within this command.

Requirements for Command Execution

The command entry must conform to command syntax.

Successful Command Output

Upon successful completion of the command, the firmware components on server and storage are

displayed. Included are:

• Component

• Action

• Current

• Available

Command Operation during Abnormal Conditions

If the command does not conform to the required syntax, the following is displayed:

Command Failed - the command does not conform to the required syntax,

SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this

section.

Example

# hardware show firmware

Elapsed time 00:37 mm:ss

Server

======

* Component Action Current Available

- ---------------- ------ --------------------- ---------

BIOS NONE P67 05/05/2011 P70 05/05/2013

ILO3 NONE 1.70 1.70

NIC NONE BC:5.2.3;iSCSI:7.2.53 BC:5.2.3;iSCSI:7.2.53

PCIeNIC NONE 4.6.247.5 4.6.247.5

76 Alphabetical List of Commands and Details