HP StoreOnce Backup System CLI Reference Guide

filesys show config
Description of Command Function
Provides information on the StoreOnce appliance file system structure.
Command Syntax
filesys show config
Command Authority
HP Support
Command Object Requirements
Not applicable – no objects exist within this command.
Command Parameter Requirements
Not applicable – no parameters exist within this command.
Requirements for Command Execution
The command entry must conform to command syntax.
Successful Command Output
edit this
Command Operation during Abnormal Conditions
• If the command does not conform to the required syntax, the following is displayed:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
Example
# filesys show config
FS_NAME STATE CAPACITY(GB) USED% Files FilesUsed% GEN NUM_SEGS
------- ------------------------- ------------ ----- ------------- ---------- --- --------
ifs1 SegmentsOnBackup, Mounted 14,222.76 3.0 1,951,596,544 1 4 4
filesys show config 59