HP StoreOnce Backup System CLI Reference Guide

config save keystore

Description of Command Function

Saves keystore information to a file in the configuration jail directory that can be retrieved, if

needed. (A configuration file listed by this may not be a valid configuration file. The user must

manage the transfer of valid configuration files into the config directory.)

Command Syntax

config save keystore

NOTE: You are prompted for a password with which to encrypt the keystore after this command

is received with the keystore parameter. This password is required to restore the keystore to the

device. Keep a copy in a safe place outside of the backup system directory. You will need to

re-enter the password to confirm before the command is finally executed.

Command Authority

Administrator

Command Object Requirements

Not applicable – no objects exist within this command.

Command Parameter Requirements

Not applicable – no parameters exist within this command.

Requirements for Command Execution

The command entry must conform to command syntax.

Successful Command Output

Upon successful execution of the command, the following is displayed:

Enter password to encrypt keystore:

Reenter password to confirm:

Keystore Save Started

Keystore Save Completed

Enter command "config show list keystore" to see the saved keystores

Command Successful

Command Operation during Abnormal Conditions

If the command does not conform to the required syntax the following is displayed:

Command Failed - the command does not conform to the required syntax,

SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this

section.

Example