HP StoreOnce Backup System CLI Reference Guide

vtl show status
Description of Command Function
Displays details on the virtual tape library status at the cluster, service set, or library level.
Command Syntax
vtl show status [SETX] [LIBX]
Command Authority
Operator and Administrator
Command Object Requirements
• SET X – This optional object defines the service set to be described. X is the numeric index of
the service set. If used on a single-node system, the object must be defined as SET1. If not
defined, the status is provided at the cluster level. If a library object is defined, a service set
must also be defined.
• LIB X – This optional object is the virtual tape library to be described. X is the numeric index
of the library. If not defined, the status is provided for all libraries. If a service set is defined
and the library is not defined, status information is provided at the service set level.
Command Parameter Requirements
Not applicable – no parameters exist within this command.
Requirements for Command Execution
• The command entry must conform to command syntax.
• All object values must be valid. See object requirements for details.
Successful Command Output
Upon successful completion of the command, the status information is displayed:
Command Operation during Abnormal Conditions
If any of the command execution requirements fail, command execution terminates, the status
information is not displayed, and one of these error messages is displayed:
• Command Failed – Did not conform to the correct command syntax “vtl
show status [SETX] [LIBX]”
• Command Failed – The service set <SETX> is invalid
• Command Failed – The service set <SETX> does not exist
• Command Failed – The library <LIBX> is invalid
• Command Failed – The library <LIBX> does not exist
Examples
# vtl show status
Object Status
------ ------
SET1
LIB1 Online
LIB2 Online
SET2
LIB1 Online
LIB2 Online
Command Successful
# vtl show status LIB1
vtl show status 265