HP StoreOnce Backup System CLI Reference Guide

vtl show slots
Description of Command Function
Displays information about the slots in the specified library
Command Syntax
vtl show slots SETX LIBX
Command Authority
Operator and Administrator
Command Object Requirements
• SET X – This required object defines the service set containing the virtual tape library to be
described. X is the numeric index of the service set. If used on a single-node system, the object
must be defined as SET1.
• LIB X – This required object is the virtual tape library to be described. X is the numeric index
of the library.
Command Parameter Requirements
Not applicable – no parameters exist within this command.
Requirements for Command Execution
• The command entry must conform to command syntax.
• All object values must be valid. See object requirements for details.
Successful Command Output
Upon successful completion of the command, the slots information is displayed.
Command Operation during Abnormal Conditions
If any of the command execution requirements fail, command execution terminates, the slots
information is not displayed, and one of these error messages is displayed:
• Command Failed – Did not conform to the correct command syntax “vtl
show slots SETX LIBX”
• Command Failed – The service set <SETX> is invalid
• Command Failed – The service set <SETX> does not exist
• Command Failed – The library <LIBX> is invalid
• Command Failed – The library <LIBX> does not exist
Example
# vtl show slots LIB1
Library : LIB1
Name: Gregslib
location Cartridge Barcode Cart Size User Data Protected Mapped
slot1 CART1 ABC001YZ 800 GB 745 GB yes no
slot2 CART2 ABC002YZ 800 GB 712 GB yes no
slot3 In drive2
slot4 CART4 ABC004YZ 800 GB 785 GB yes no
slot5 CART5 ABC005YZ 800 GB 455 GB yes no
slot6 CART6 ABC006YZ 800 GB 601 GB yes no
slot7 CART9 ABC009YZ 800 GB 35 GB yes no
slot8 CART8 ABC008YZ 800 GB 767 GB yes no
slot9 CART7 ABC007YZ 800 GB 100 GB yes no
slot10 empty
slot11 empty
slot12 empty
mail empty
drive1 empty
vtl show slots 263