HP StoreOnce Backup System CLI Reference Guide

accounts show
Description of Command Function
Lists all the user accounts and their authority level defined for the StoreOnce appliance.
Command Syntax
accounts show [CURRENT]
Command Authority
Administrator and Operator
Command Object Requirements
CURRENT – This is optional parameter returns details on only the currently logged in user’s account.
If the user is logged in as an Operator level user, then details about that user’s own account is
displayed. The CURRENT parameter is not required.
NOTE: If Administrator level users do not use CURRENT as part of the command syntax, all
accounts associated with this device are displayed.
Command Parameter Requirements
Not applicable – no parameter values exist within this command.
Requirements for Command Execution
• The command entry must conform to command syntax.
• If the current object is included in the command entry, only information for the current account
is shown.
• A user with user permissions sees only their account.
• A user with admin permissions sees all accounts on the system.
Successful Command Output
Upon successful completion of the command, the following is displayed for each account:
• User name
• Type – local user, external user, or external group
• Authority level – admin or operator (user)
Command Operation during Abnormal Conditions
• If the command does not conform to the required syntax, the following is displayed. SYNTAX
is the command syntax as described under Command Syntax in this section.
Command Failed - the command does not conform to the required syntax,
SYNTAX
• If any of the command elements (accounts, show) is misspelled, the error, element:
command not found, is displayed.
Examples
# accounts show
User Name Type Authority
------------ ---------- ---------
Admin Local User admin
Joe_Admin Local User admin
Joe_Operator Local User user
Operator Local User user
accounts show 25