HP StoreOnce Backup System CLI Reference Guide

ManualsBrandsHP ManualsStorageHP D2D4004fc Backup System

191

192

193

194

195

196

197

198

199

200

system show performance

Description of Command Function

Provides a snapshot of the StoreOnce appliance’s real-time performance. If a service set object is

included in the command entry, the information is only provided for that service set.

Command Syntax

system show performance [SETX]

Command Authority

Operator and Administrator

Command Object Requirements

SET

– This optional object is a service set. It is the software operations which reside on a given

node and support the StoreOnce function. SETX is a label for a given service set where X is a

unique index.

Command Parameter Requirements

Not applicable – no parameters exist within this command.

Requirements for Command Execution

The command entry must conform to command syntax.

Successful Command Output

Upon successful completion of the command, information about the StoreOnce appliance

performance is displayed.

Command Operation during Abnormal Conditions

If the command does not conform to the required syntax, the following is displayed:

Command Failed - the command does not conform to the required syntax,

SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this

section.

Example

# system show performance

Service Set 1

Storage Usage

Current: 0.6 TB

Maximum: 15118.859374756 TB

Throughput

VTL Read: 0 MB/s

VTL Write: 0 MB/s

NAS Read: 0 MB/s

NAS Write: 18122268 MB/s

Catalyst Read: 0 MB/s

Catalyst Write: 38316714 MB/s

Replication

Inbound: 13450032 MB/s

Outbound: 13450032 MB/s

Catalyst

Inbound: 0 MB/s

Outbound: 0 MB/s

Service Set 2