HP StoreOnce Backup System CLI Reference Guide

net show status all
NOTE: This command applies to single-node products only.
Description of Command Function
Displays status information on all of the subnets and ports.
Command Syntax
net show status all
Command Authority
Operator and Administrator
Command Object Requirements
Not applicable – no objects exist within this command.
Command Parameter Requirements
Not applicable – no parameters exist within this command.
Requirements for Command Execution
The command entry must conform to command syntax.
Successful Command Output
Upon successful completion of the command, the statuses of the subnets and ports are shown.
Command Operation During Abnormal Conditions
If the command does not conform to the required syntax, the following is displayed:
Command Failed - The command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
Example
# net show status all
Hostname: HPMXQ20601KL
Default Domain Name: gbr.hp.com
Default Gateway: 16.24.160.1
Default Subnet: subnet_one
DNS Server :
Subnet subnet_one status: up
Subnet: subnet_one
Status: up
IP Address: 16.24.174.239
Netmask: 255.255.240.0
Domain Name: gbr.hp.com
Gateway: 16.24.160.1
Mac Address: E4:11:5B:CF:44:C2
Connection Speed: 1 Gig
Port status:
Command Successful
net show status all 143