HP StoreOnce Backup System CLI Reference Guide

net show ipaddr
Description of Command Function
Displays the IP addresses for the configurations subnet.
Command Syntax
net show ipaddr <netlabel> <sublabel>
Command Authority
Administrator
Command Object Requirements
• netlabel – This object specifies the network configuration name.
• sublabel – This object specifies the subnet name.
Command Parameter Requirements
Not applicable – no parameters exist within this command.
Requirements for Command Execution
• The command entry must conform to command syntax.
Successful Command Output
Upon successful completion of the command, the following message is displayed, and then the
CLI returns to the user prompt:
Command Successful
Command Operation during Abnormal Conditions
Command Failed - Did not conform to the correct command syntax for
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
Example
# net show ipaddr current subnet_one
10.12.13.12
Command Successful
net show ipaddr 137