HP StoreOnce Backup System CLI Reference Guide

Do you want to configure the network domain name or get the domain name from DHCP?
1 = Domain name obtained from DHCP server (default)
2 = Set domain name manually (e.g. mydomain.local)
-->1
<--Domain Name: Domain name obtained from DHCP server
----------------------
Network: subnet_3
----------------------
IP Addresses: dhcp
Net Mask: dhcp
Domain Name: dhcp
Gateway: dhcp
VLAN tag:
Port Set: portset_2 with these interfaces: eth5
Bonding Mode: Not applicable
Is this configuration correct?
1 = Yes (default)
2 = No
-->1
<--Configuration okay: Yes
Do you want to configure another subnet?
1 = No (default)
2 = Yes - on a new port set
-->1
<--Another subnet: No
Select a default network (The default network shall be used as the default gateway subnet) :
1 = subnet_1 (default)
2 = subnet_2
3 = subnet_3
-->1
<--Default Subnet: subnet_1
*Step Complete* Do you want to :
1 = Go to next step: Step 3) (default)
2 = Go back to previous step: Step 1)
3 = Go back to start of present step: Step 2)
4 = Quit wizard and lose all settings
1
You have successfully configured the network settings
on your StoreOnce Appliance.
NOTE: The example output is in a small font to fit on this specification page. As a CLI output,
the character string wraps at the end of a terminal line.
134 Alphabetical List of Commands and Details