HP StoreOnce Backup System CLI Reference Guide

net modify subnet
Description of Command Function
This command modifies parameters in a named subnet of a saved configuration. It is not possible
to modify the default configuration. To add or remove IP addresses, use net add ipaddr or
net delete ipaddr.
NOTE: It is not possible to modify the default configuration.
Command Syntax
net modify subnet <netlabel> [params]
Command Authority
Administrator
Command Object Requirements
• netlabel – This label identifies the network configuration containing the subnet configuration
to be modified. This label is case insensitive.
• sublabel – This label identifies the subnet configuration being modified. This label is case
insensitive and can include:
◦ [default { yes | no }]
◦ [domain <string>]
◦ [netmask <mask>]
◦ [gateway <gateway>]
◦ portset <portsetname>]
◦ vlanTag <tag>]
◦ netUsage { mgmt | data | both }]
NOTE: The default value for netUsage is data.
Command Parameter Requirements
• default – This optional parameter defines if the preceding subnet configuration is the default
subnet. The values for this parameter can be either Yes or No.
• domain – This optional parameter defines the domain name for the subnet configuration.
• netmask – This optional parameter defines the netmask. If the IPAddr value is DHCP, a value
is not required for netmask.
• gateway – This optional parameter defines the gateway for the subnet configuration.
IMPORTANT: If a parameter is undefined in the modify command sequence, the current parameter
value remains unchanged.
If a parameter is given the value, undefined, a value is no longer declared for the parameter.
Requirements for Command Execution
• The command entry must conform to command syntax.
• All object values must be valid. See object requirements for details.
• All parameter values must be valid. See parameter requirements for details.
128 Alphabetical List of Commands and Details