HP StoreOnce Backup System CLI Reference Guide

net modify config
Description of Command Function
Modifies the parameters in an existing network configuration.
Command Syntax
net modify config <netlabel> [description <string>] [WriteProtect
{Yes|No}] [DNS {IPaddr|DHCP} [subnet <label>] [default {yes|no}] [domain
{<string> | DHCP}] IPAddr {DHCP|IP address} [netmask <mask>] [gateway
<gateway>] port <list>
Command Authority
Administrator
Command Object Requirements
netlabel – This value is the label which identifies the network configuration that is to be modified.
This label is case insensitive.
• current – The execution of the command on the “current” configuration involves more activity
than simply modifying parameters as when executed on other configurations. The following
is a list of activities that occur when the “current” configuration is modified:
1. The current configuration is copied to a temporary data structure.
2. The modifications defined in the command sequences are made to this temporary structure.
3. The temporary structure is activated.
◦ If the activation is successful, the changes made to the temporary structure are made
to the current network configuration, and the temporary structure is discarded.
◦ The description is updated with the following string Configuration modified
on DATE by USER, where DATE is the system date and time in which the
modification was made. USER is the account user from which the modification was
made.
◦ If the activation fails, the command sequence fails. The temporary structure is
discarded, and the original current configuration is activated.
• Factory_Default_Configuration – This configuration cannot be modified.
Command Parameter Requirements
• description – This optional parameter describes the network configuration and is contained
in quotes (“). There is no limit to the number of characters.
• WriteProtect – This optional parameter determines if the network configuration can be modified.
The values for this parameter can be Yes or No. Yes means the network configuration cannot
be modified (with one exception – the WriteProtect parameter can be modified). If this
parameter is not defined in the command sequence, the default value is No. (The DEFAULT
configuration cannot be modified. The WriteProtect parameter of the DEFAULT
configuration is always Yes. The WriteProtect parameter of the DEFAULT configuration
cannot be modified.)
• DNS – This optional parameter defines the DNS servers used in the network configuration.
The value can contain up to three IP address or the text, DHCP. The value, DHCP, indicates
the DNS servers are defined by the DHCP server. If more than one value is defined, the values
are separated by commas.
• mgmtvif – This parameter defines the management virtual interface IP address.
126 Alphabetical List of Commands and Details