HP StoreOnce Backup System CLI Reference Guide

net delete subnet
Description of Command Function
Deletes a subnet configuration.
Command Syntax
net delete subnet <netlabel> <sublabel>
Command Authority
Administrator
Command Object Requirements
• netlabel – This label identifies the network configuration to which the subnet is to be added.
This label is case insensitive.
• sublabel – This label identifies the subnet configuration within the defined network configuration
that is to be deleted. This label is case insensitive.
Command Parameter Requirements
Not applicable – no parameters exist within this command.
Requirements for Command Execution
• The command entry must conform to command syntax.
• All object values must be valid. See object requirements for details.
Successful Command Output
Upon successful completion of the command, information on the external network configuration is
displayed.
Command Operation during Abnormal Conditions
If the command does not conform to the required syntax, the following is displayed:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
Example
# net delete subnet management 10GbE
net delete subnet 125