HP StoreOnce B6200 Maintenance and Service Guide (February, 2014)

2. You are now accessing the active Management Console via the external network and can
perform all StoreOnce CLI commands.
HP Support users only
Once you have accessed the Active Management Console from either the internal or external
network, you can use the hpsupport <password> command to access the Linux shell to perform
Linux commands and navigate to other nodes, storage or network. For a fill list of the internal
network addresses see Internal network static IP addresses (page 17). You can login to any of the
hardware identified in the internal network IP address table using the following commands:
• For Node2:
ssh 10.154.4.2
or ssh node2
• For P2000 CtrlA Node A:
ssh manage@10.154.2.2
• For network switch Rack 1:
telnet 10.154.6.1
Internal network static IP addresses
The following internal IP addresses are assigned at configuration and can be used to access any
of the components listed.
Table 4 Internal network static IP addresses
Network switches
AddressPort/ComponentDeviceAddressPort/ComponentDevice
10.154.6.4R2 Switch BNetwork switch
R2
10.154.6.2R1 Switch BNetwork switch
R1
10.154.6.3R2 Switch A10.154.6.1R1 Switch A
Couplet 4Couplet 2
AddressPort/ComponentDeviceAddressPort/ComponentDevice
10.154.4.7bond0Node 710.154.4.3bond0Node 3
10.154.5.7iLONode 710.154.5.3iLONode 3
10.154.4.8bond0Node 810.154.4.4bond0Node 4
10.154.5.8iLONode 810.154.5.4iLONode 4
10.154.2.7Controller AFirst P2000 shelf10.154.2.3Controller AFirst P2000
shelf
10.154.3.7Controller BFirst P2000 shelf10.154.3.3Controller BFirst P2000
shelf
10.154.2.8Controller ASecond P2000
shelf
10.154.2.4Controller ASecond P2000
shelf
10.154.3.8Controller BSecond P2000
shelf
10.154.3.4Controller BSecond P2000
shelf
Couplet 3Couplet 1
Onsite and offsite troubleshooting and repair 17