HP Store Once Backup System 2700, 4500 and 4700 Installation and Configuration Guide

Connecting the HP StoreOnce 4500 Backup system
Figure 8 Rear view of the HP StoreOnce 4500 Backup system
FC card 12.RAID controller 11.
Power supply bay 14.10 GbE card3.
USB connectors (4)6.Power supply bay 25.
iLO4 port, do not use for data connection8.Video/monitor connector7.
1 GbE network port 1, connect for Quick Install10.Serial connector9.
1 GbE network ports 2, 3 and 411.
Connecting the HP StoreOnce 2700 Backup system
Figure 9 Rear view of the HP StoreOnce 2700 Backup system
USB connectors (4)2.RAID Controller – external port is unused1.
Power supply bay 2 (optional)4.Power supply bay 13.
Serial connector6.iLO4 port, do not use for data connection5.
1 GbE network port 1, , connect for Quick
Install
8.Video/monitor connector7.
1 GbE network ports 2, 3 and 49.
Attaching the security bezel
The product is supplied with a security bezel that is placed inside the box, and not delivered
pre-installed on the servers. Once the server is installed within the rack, the security bezel may be
clipped to the front of the unit. No special tools are required to do this.
NOTE: The key to lock the bezel is attached to the back of the security bezel. Only one key is
supplied.
24 Installing and cabling the HP StoreOnce Backup system